Designed by a team of international engineers, Air-Zone's ozone generation elements have received a patent from the U.S. Patent office.

A U.S. Patent takes years of research and engineering design submissions to obtain. Over 95% of patent applications are rejected!!!
It is extremely difficult to receive a U.S. patent as the inventor must prove it is a different and new design.
It took our engineers over 10 years to design these new ozone elements, and what they have invented is state of the art. 
Our engineers designs are light years ahead of any other ozone technology available today.

Almost every other high powered ozone generator produced today uses basically the same system;
A transformer that supplies a high voltage to two screens separated by a piece of non-conductive material such as glass or mica. Some use screens, some use rods or tubes.
Basically it is the same system in different forms. These systems can produce high amounts of ozone, but they have some inherent problems. 

First: these same plate designs have been used for over 100 years!
Thomas Edison used this exact method to produce ozone in 1900, before they even had instruments to measure ozone!

Second: the ozone plates or screens must be perfectly aligned to produce the maximum amount of ozone they are designed for. If the grids are not aligned properly ozone production drastically drops. If the grids are too close to each other the high voltage will arc from one grid to another. Ozone production gets lower and lower, and eventually the transformer blows out from overload.
The plates often have to be completely removed and fully cleaned. Then they have to be reassembled by the users in a perfect manner for them to work properly.

Third;
These old fashioned screens, or plates must constantly be cleaned to work at maximum efficiency. If allowed to remain dirty the plates arc across the buildup of gunk and the transformer again blows out. Our patented ozone elements are designed to resist dirt buildup and not have these problems.

We think it too much to ask that every one of our customers become an ozone engineer, and have to deal with all these problems. 

All you have to do with our patented ozone elements is replace the inexpensive air intake filter on the outside of the unit from time to time. 

The elements may also be blown out with air to remove any visible dust. We think this is a lot easier than removing, cleaning, and perfectly reassembling all the components of each plate.

Our patented ozone elements are in a completely sealed housing so that there is absolutely no adjustments required.
There are no other corona elements like them available anywhere. Our patented ozone elements are in a sealed non-adjustable housing so that their alignment is always perfect. 
This is a far supierior element design than ANY other ozone generator manufacturer has.

Due to their design they resist accumulating dirt. When they do burn out, and ALL ozone producing elements eventually will, they are extremely cheap and easy to replace. 
If an element burns out it can be replaced by almost anyone with a screwdriver in about 5 minutes. You simply remove the front cover, slide the old element out and disconnect the wires. You then connect the wires to the new element, slide it back into it's slot, and screw the cover back on. No alignment, no assembly, no hassle. They are also very economical to replace costing about $5.00 per year of use.

There are no adjustments, zero nitrogen oxides, nor is their any major cleaning required of them. As long as the air intake filter is replaced occasionally these elements will last for years. The air filters cost only pennies.
Any unit without a dust filter will get dirty, and is destined to fail.

This is 21st century design when every other ozone company is still using 19th century designs!!
Our replacement elements are also extremely low priced, and they only cost pennies per each month of use.

Some companies berate our patented ozone elements for being disposable. They are disposable and they are designed that way so the customer can replace these inexpensive ozone elements in minutes.
Our patented ozone elements also last as long or longer than any other ozone elements produced anywhere.

Old fashioned ozone plates with their 100 year old design are now considered archaic. Manufacturers continue to use them because they are extremely cheap to produce, or they have no idea of how to make a better plate. Other companies don't even understand how our ozone elements work!

Air-Zone offers the highest ozone output per dollar of any ozone generator brand. The only way to compare ozone generators is by the output in milligrams per hour (mg.hr.). No other company offers as much ozone as we do for as low a price as we do. Combined with our features of Patented Ozone Elements, and the convenience of remote control, there is simply no better ozone generator value available today.

True Ozone Outputs

All Air-Zone ozone generators have had their ozone outputs independently measured by SGS, the worlds leading verification, testing, and certification company. The world  respected Société Générale de Surveillance otherwise known as SGS. SGS provides true certifications that cannot, on their companies well respected reputation, be called into question.

Many other ozone companies simply test their own machines under questionable conditions and their mg/hr output levels of ozone might not be quite accurate. 
We know of one competitors 10,000 mg/hr rated machine that barely puts out 8000 mg/hr.
You may run across a company that tells you they have measured our machines and our ozone outputs did not measure up to what we state they are.  That's why we use the independant tests from SGS that cannot be called into question.  Be sure an ask them which independant organization has tested their machines.

Ion Generators simply negatively charge the air's ions so that floating dust particles will cling to a surface in the room, much in the way static electricity does. They are toys compared to real ozone generators.

There are quite a few problems associated with ion generators. To do air cleaning, meaning removing pollutants, you need a very large amount of ions. More than has been recognized as a safe level.  According to air science,  indoor air has 100 to 200 ions per cubic cm, outdoor fresh air has 200 to 500 ions per cubic cm,  and a fresh clean forest will have 1,500 to 5,000 ions per cubic cm. 

Ion generators typically produce more than 1,000,000 to 10,000,000 negative ions per cubic cm. Some machines even boast an output of 500 trillion negative ions per cubic cm! This is simply too much. 

Air-Zone's ozone generators produce negative ions of about 10,000 to 30,000 per cubic cm. Therefore, the amount of negative ions output from our ozone generators is good enough for giving indoor air that fresh clean smell, and yet is not too much as to be irritating to your eyes, lungs, and throat.

Overuse of negative ionization pushes dust particles to the walls and floor. In fact for ionization to be truly effective, ionizers must generate so many ions that they cause headaches and sore throats.

The fact is even with this overabundance of ionization there is only limited, temporary air cleaning being done and ZERO Air Purifying being accomplished. Nothing is being killed by the ions. Nothing is being Purified.

The problem with this is that the same dust can be kicked right back into the air for you to breathe. The dirt that does not begin to float again will stick to whatever surface is close. After a few months walls, floors, appliances, and furniture begin to build up a layer of dirt on them. If you put an ionizer on a table near a wall, the wall will develop a black halo of dirt in just a couple of days!

Realize that what all so-called "air cleaning" ionizers do is limited to pushing around lightweight particles of dust. They cannot effectively kill odors.

For removing odors, and light dust only OZONE works the best by killing offending the organisms.

If in fact you have severe dust problems it is much better to collect dust in a true HEPA filter rather than have an ionizer create a film of dirt on your household surfaces. We also offer a high quality line of the worlds best HEPA filters for serious dust & dander problems.

Nitrogen Oxides are a by product of every other corona discharge ozone generation system available today. These gases are undesired and have even been found to be dangerous to living beings. Some ozone generation systems put out an extremely high amount of these gases. 

Old fashioned corona ozone plates produce high amounts of Nitrogen Oxides. These oxides are irritating to breathe, and are claimed to possibly be dangerous. Nitrogen Oxides have no desired place in ozone production.

Air-Zone conducted a world wide search until we found a better, and safer way to produce ozone.

Air-Zone's Patented Ozone Elements put out ZERO NITROGEN OXIDES. 

Other manufacturers claim that this is not possible, but they do not understand our technology, nor do they hold our engineer's patent. 

Permanently Sealed High Voltage Transformers

Just about every ozone generator manufacturer simply u