These units also puts out a sensible amount of negative ions that help scrub the air clean, and cause many floating particles of dust to simply fall to the floor.

They are designed for continuous or timed air cleaning & odor control in bedrooms, offices, and similar areas. They both have fully variable ozone control, and a built in "Burst" timer that makes it perfect for use in occupied areas. 

The XT-120 / 240 series now include a free "Burst Timer".  This sophisticated electronic timer makes the unit extremely versatile for room air purification. The user can set the timer to have the unit give "bursts" of ozone for either 10, 20, 30, 40, 50, seconds per minute. This allows there to be very short bursts of ozone instead of a continuous blast. That means these units can be used in the smallest of rooms without becoming overpowering. No other air purifier has this type of useful timer built right in!

The XT-120 is powerful enough to clean the air in a room 15 feet by 15 feet or larger in a matter of minutes. The XT-240 can purify the air in rooms up to 30 feet by 30 feet.
These are very powerful units. The ozone output levels barely have to be raised above their lowest settings to clean the air in room sizes mentioned.
They are also strong enough to give light ozone shock treatments to small areas to remove strong odors.

Small but extremely powerful, these units have the highest ozone output for any ozone generators available for the price anywhere!
These units blow the doors off of units cost 2 & 3 times the price. 
They  have to be tried to be believed. These units actually attack and kill the source of the offending odors in a way that ionizers cannot.

XT-120 Rated Ozone Output Per Hour: Fully variable  from 5 mg/hr to 120 mg/hr. ACTUAL OZONE OUTPUT: 140 mg/hr Burst Timer: 10, 20 ,30, 40, 50 seconds per minute or continuous use option. Ozone Generation Method: US Patented Xetin Corona Discharge Elements Ozone Air Flow Rate: 3.5 CFM with a quiet precision ball bearing fan Electrical Source: AC 110V-120V, 60 Hz Electrical Consumption: 10 Watts Dimensions: 5" X 6" X 4.5" Weight - 2.5 lbs. CLICK HERE for more info on the XT-120 XT-120 Price; $199.99

XT-240 Rated Ozone Output Per Hour: Fully variable  from 10 mg/hr to 240 mg/hr. ACTUAL OZONE OUTPUT: 280 mg/hr Burst Timer: 10, 20 ,30, 40, 50 seconds per minute or continuous use option. Ozone Generation Method: US Patented Xetin Corona Discharge Elements Ozone Air Flow Rate: 3.5 CFM with a quiet precision ball bearing fan Electrical Source: AC 110V-120V, 60 Hz Electrical Consumption: 10 Watts Dimensions: 5" X 6" X 4.5" Weight - 2.5 lbs. CLICK HERE for more info on the XT-240 XT-240 Price; $259.99

For the home use the XT-400 or the XT-800 are the recommended models because of their ease of use,  & their total control over the ozone output.

They also have the high ozone outputs needed to remove strong odors and kill mold spores. 
They offer more control of the ozone output than the 120/240 series, and are perfect for ANY sized room.

The problem with most ozone air purifiers is either that they are not strong enough, or they are too strong as to become overpowering.

The remote can regulate the exact amount of ozone needed just as easy as changing the channel on your TV! The remote turns the unit on and off, as well as controlling the ozone output, fan speed, and the built in timer - all from across the room!  There has never been a more versatile ozone generator ever before!

With burst times as short as 2 seconds per minute, and the included wireless remote control, 
the XT-400 perfect for even the smallest of rooms. With it's Half Power Switch the XT-800 is even more versatile.

Providing air cleaning & odor control in bedrooms, offices, and rooms up to 40' X 40' or larger, 
the XT-400 can also be used to give shock treatments in small areas to combat strong odors.
The fully variable ozone control & built in burst timer make it perfect for use in any sized area.

The XT-800 is a DOUBLE POWER unit designed to be used offices, and large rooms.
It can also give shock treatments in larger areas to combat strong odors.
It includes a Half Power Switch to make this unit versatile enough for use in even the smallest of rooms.
 

The ozone level control on the XT-400 and XT-800 enables the user to set  intervals of ozone "bursts" that make these units extremely versatile for room air purification. This will burst the ozone on for either 2, 5, 10, 20, 25, 30, 40, 50, or 60 seconds per minute, thereby creating a lower total ozone output for use in the smallest of rooms without the ozone from becoming overpowering. In addition there is a 10 - 90 minute countdown timer on the units so that bacteria killing High Ozone Shock Treatments can be performed easily in unoccupied rooms. The XT-800 also features a Half Power Switch. This enables the user to switch off one transformer of the unit essentially turning it into an XT-400. This is especially useful for lowering the total output in smaller areas.

XT-400 / XT-800 XT-800 Half Power Switch

The Patented Xetin Ozone elements last for years, and are easily replaceable in 10 minutes with a Phillips head screwdriver. The elements are in a permanently molded housing, and require no adjustments whatsoever. They also don't produce any measurable Nitrogen Oxides. They are also extremely low cost to replace.

These units are great for removing tough odors. They can combat  mold and mildew odors with high ozone shock treatments by attacking the offending organisms. 

The Patented Xetin Ozone elements last for years, and are easily replaceable in 10 minutes with a Phillips head screwdriver. The elements are in a permanently molded housing, and require no adjustments whatsoever. They are also extremely low cost to replace.

An electronic protection circuit and  fuse prevent the internal components from overload & burnout.
The easy to replace, inexpensive 3M filter pad keeps the inside of the unit dust free. 
10 filter pads are included with every unit, and similar electrostatic replacement filters cost pennies at Home Depot and other hardware stores.

These are very strong units and the ozone output levels barely have to be raised above their lowest settings to purify the air in a room.

We sell these for 1/2 the price, and more power than the competition. Plus these units feature wireless remote control, and a built in timer. They are 2-4 times the value of our competition.

CLICK HERE to compare these units to the competition, and see why they are the best air purification / ozone generation value on the market available today.

These are the highest powered, most versatile ozone generators available for the price anywhere!

Air-Zone XT-400 Rated Ozone Output Per Hour:  13 mg/hr - 400mg/hr ACTUAL OZONE OUTPUT: 445 mg/hr Ozone Generation Method: US Patented Xetin Corona Discharge Elements Ozone Air Flow Rate: 37 CFM with a quiet precision ball bearing fan Electrical Source: AC 110V-120V, 60 Hz Electrical Consumption: 0.09 Amp, 10 Watts Dimensions:  11.38" X 4.24"  X 4.65"  Weight - 4 lbs. CLICK HERE for more info on the XT-400 XT-400 Price; $329.99

Air-Zone XT-800 Rated Ozone Output Per Hour:  13 mg/hr - 800mg/hr ACTUAL OZONE OUTPUT: 890 mg/hr Ozone Generation Method: US Patented Xetin Corona Discharge Elements Ozone Air Flow Rate: 37 CFM with a quiet precision ball bearing fan Electrical Source: AC 110V-120V, 60 Hz Electrical Consumption: 0.2 Amp, 20 Watts Dimensions:  11.38" X 4.24" X 4.65" Weight - 4 lbs. CLICK HERE for more info on the XT-800 XT-800 Price; $439.99

They are designed for odor removing high ozone shock treatments of unoccupied areas. 

They feature a brand new patented method of corona discharge ozone generation, that's the latest in 21st century technological design.

These units have the highest amount of ozone output for the dollar than any other ozone machines available today.

The new style, patented ozone generator elements inside the unit require no maintenance.
They produceZero Nitrogen Oxides that can make some ozone generators dangerous and offensive.

The Countdown Timer runs the machine from 10 minutes up to 2 1/2 hours and then it shuts the unit off. The Continuous mode allows for longer, or overnight applications.  The timer's smart chip remembers the last setting even if the unit is unplugged. Easy one button time select operation.

Combats mold and mildew odors with high ozone shock treatments by attacking and destroying the offending organisms. These are the machines homeowners and professionals use to kill mold spores in high humidity and flooding situations.

Great for removing smoke & mold odors in Basements, Motel Rooms, Restaurants, and Bars.
Operates at full ozone power even in high humidity environments. 

Industry Standard 4" Reinforced Intake & Output Vents allow for easy  routing of ozone to any desired area.

Power Transformers The heart of any ozone generator is its power transformer.  It is the electrical component that produces the high voltage that is needed make the ozone. That's why it's selection, and construction is of the utmost importance.  It can be the most costly part in any ozone machine. Air-Zone uses completely sealed, high voltage transformers, that can withstand a lot of abuse before shorting out. They are designed specifically for our ozone generators.  Combined with our innovative ozone element design, it is very rare that one of our power transformers blow out. Competitors use off the rack, open iron core transformers. The exposed iron can quickly rust and deteriorate. These types of transformers are not specifically designed for use in an ozone generator, and have a hard time maintaining a long life span in this type of machine. Other companies also use the same exact transformer in many different sized models. Multiple Transformers Air-Zone uses multiple transformers in our different models.  How can a single transformer that is used in a small ozone machine be expected to handle the much higher load in a large ozone generator? Many competitors machines simply use ONE transformer, the SAME EXACT transformer in many of their different low and high ozone output generator models. Whether it be a single plate 1000 mg/hr model, a 5 plate 3600 mg/hr model, a 5 plate 5000 mg/hr model, or a 10 plate 10000 mg/hr model, some manufacturers use the same exact transformer in every machine. How can the SAME transformer that is expected to handle one high voltage ozone element, handle ten high voltage ozone elements? That's a 1000% increase in the power load. If a competitor states "Our transformer is so good we can use the same one in our low powered model as our high powered model" then what justifies the huge jump in price between the low and high powered models? It seems to us they are just charging the customers empty dollars of more and more profits for increased ozone power. That's why ozone generators that are "upgradable" by simply adding more ozone plates are not very well designed. The load on the transformer HAS to be radically different on a single or five plate ozone generator.  This is proven by the fact that when a competitor adds 4 more ozone plates to a 1000 mg/hr machine it does NOT equal 5000 mg/hr.  The "upgraded" generator now only puts out 3600 mg/hr, the missing 1400 mg/hr of ozone output has been lost because the transformer has a hard time handling the different load. That proves that the load is radically different when you simply add more ozone plates to a power transformer.  If the transformer has been strained so that it looses that much ozone power, then it can be concluded it is that much closer to straining and blowing out.  It has to run at a higher temperature.  So if competitors ozone plates are as cheap in cost as they say, and they use the same transformer in a 1000 mg/hr machine AND the 10,000 mg/hr machine, what justifies the more than $700.00 cost difference between the two models? Air-Zone uses multiple transformers in our different higher powered models. Our XT-2000 uses a single transformer. The XT-4000 uses 2 transformers. The XT-6000 uses 3 power transformers.  Our larger models use even more transformers. We do this because to present a balanced load, and to have even power distribution.  It is better to use multiple transformers when doubling or tripling the ozone power. It only makes good sense. It makes for a more balanced ozone machine. Keep in mind the fact that competitors also use ozone plate technology where each "plate" has 3 pieces in it that can easily move around.  They use a spring system to keep each part of the plate in perfect alignment. A 10 plate, 10,000 mg/hr ozone machine will have 30 separate pieces in its 10 ozone plates!  A 10,000 mg/hr "plate type" ozone machine has 30 parts that must ALWAYS be in perfect alignment or disaster will occur. If a single piece of the glass or mica non-conductor breaks, cracks, or just slips out of alignment due to a lack of spring tension, then the electrical conductor, screen parts of the ozone elements can arc and cause an electrical short.  When an ozone plate short outs, the transformer is also shorted out.  No matter how well it is built, a transformer cannot stand being shorted out for very long.  Electrical transformers cannot stand to have a high voltage, zero ohm load on them for very long without being put under a huge amount of strain. Air-Zone not only uses multiple transformers in our higher powered units to help balance the load, they also use our U.S. patented ozone elements which do not have components in them that can move, or shift  out of alignment.  There is no way for them to short out as standard ozone plates can. Air-Zone are simply more stable ozone generators than most other brands.

An electronic protection circuit and fuse prevent the internal components from overload & burnout.
The rear 3M filter' last for months and only cost $2.00 to replace.
They help keep the inside of the unit dust free.

CLICK HERE to compare these units to the competition, and see why they are the best ozone generation value on the market available today.

These units use very little electricity, and are completely portable.
Multiple XT-6000's can be used at the same time for even more ozone output power.

These units are not meant for occupied areas, as they are too powerful to be turned down to acceptable air purification ozone levels. They are only to be used in unoccupied spaces.

Five Year Warranty

CLICK HERE for more information on the Amazing XT High Powered series.
 

Good! XT-2000 Price $549.99

Better!! XT-4000 Price $674.99

Best!!! XT-6000 Price $799.99

The XT-301 is the worlds finest home ozone water purifier.  Ozone has been used for over a century to purify drinking water. 
Ninety percent of the worlds drinking water, including most bottled water, is ozone treated to kill germs and bacteria. 

Ozone easily destroys E coli and Salmonella bacteria as well as many other types of germs in drinking water.

There is simply no better way to truly purify water than with our patented ozone water purifier.

Purifying water with the XT-301 could not be more simple. A simple air hose leads to an aquarium type rock that bubbles the ozone through water.  Place the hose in a gallon, or larger jug of water,  and in 15 minutes you have crystal clear pure water.

Along with the germ killing properties of ozone, the simple act of bubbling ozone through water will help release the remaining chlorine left in the water.

"Chlorination, used in most every municipal system, kills or inactivates viruses as well as bacteria like E. coli and salmonella. It does not kill anthrax spores. Some plants also treat water with ozone, which is more effective in killing protozoan like crypto." Newsweek

The XT-1800W is an under the sink, or single line 1/2 inch connection continuous flow water purifier.

The XT-5600W is a whole house, or business 3/5 inch connection continuous flow water purifier.

Not sold in the retail stores these TRUE HEPA filtration units do a much better job than those sold in department stores. Pet dander and large particle dust can be managed effectively with our HEPA filters.
HEPA filters are now being used  to collect and prevent the spreading of Anthrax spores in offices, hospitals, and postal facilities.

     All Austin Health Mate air cleaners feature double filtration power for full air quality protection.   The HEPA (High Efficiency Particle Arresting) filter was developed by the U.S. government to protect scientists from radioactive airborne particles. The HEPA air filter removes 99.97% of harmful particles, including dust, mold spores, dust mites, pet dander and other troublesome allergens. HEPA filters can even trap deadly mold spores.

Many times there is an odor in a room, but it may not be clear where it is coming from.
These lamps can help determine the location of an odor and make the remediation job easier.

These professional lamps are designed to display ultraviolet light in long wave frequencies.
Long wave UV light is required to find contaminants such as urine and mold. 

Our simple, do it yourself test identifies dangerous molds & mildew in 48 hours. 

Optional lab analysis is available to indicate the exact count and type of mold & mildew present.

The kits may be used one time. For multiple area testing additional kits will be required.

Mold testing is the only way to know what kind of mold you have. Testing is also the only method to know if you have killed the mold after remediation.

Eco Badge® Ozone Detector Cards provide a low cost alternative to ozone meters for ensuring that an environment is within accepted safety standards when using an ozone generator, or any other place where ozone levels are desired to be monitored. These patented ozone test cards were originally developed for NASA.

These test cards are very easy to use. Just open up one of the sealed pouches and take out the test card and tape it to a wall or any other convenient surface.

After one hour you match the color of the card to the colors on the calorimetric strip to determine the ozone level.  They couldn't be any more easy to use.

Ten Ozone Detector Test Card Kits Price $39.99